PT 3100 D
Stand-disperser (High-End Line)
Stand-disperser (High-End Line), flexible-use disperser with EU-power cable, PC software, RS-232 / USB connection cable (230 V)
Applications with the highest demands for reproducibility and scaling up can be efficiently performed with this device. The fully digitized control and regulation system is very easy to operate. The illuminated LCD display shows all the parameters, which can be changed with the membrane keypad.
Drive Unit EU type E+F (CEE7/7) power cable
BENEFITS
Ergonomics
– Easy operation with an on–off switch and membrane keypad
– Digital speed control for long equipment life
– Protection against overheating, overload and blocking
– Speed stability even with changes in viscosity
– Easy to adjust motor height (depending on the stand)
– Aggregates quickly switched with Click & Go coupling
– Easy aggregate clean–up with EasyClean Design
Results are convincing
– Smallest sizes of particles / droplets: because precise analysis require homogeneous samples
– Efficient sample preparation: because fast dispersion saves time
– Standard or custom-made aggregates: perfected for and in cooperation with the users
– Cleaning and disassembly: EasyClean Design makes it very simple
– Quick coupling of the aggregates: by using Click & Go
– Best materials available: because without them, we could not call it Swiss Made
– Durability is a Swiss virtue
TECHNICAL INFORMATION
-
0.1
-
10000
-
1200
-
Up to max. 32 m/s
-
ø 5 mm to 36 mm
-
500 – 30 000 rpm
-
Aggregates with F coupling
-
66 dB(A) at 25 000 rpm / 73 dB(A) at 30 000 rpm
-
Universal with carbon brushes
-
110 – 230 V ± 10 %, 50Hz / 60Hz
-
80 % during storage / 80 % during operation
-
0 – 40 °C
-
RS-232 (D SUB 9) / USB socket B
-
IP 20
-
Drive: 240 x 130 x 265 mm
-
Drive: 3.9 kg
-
IEC / EN 61000-6-2 / EN 61000-6-3
-
IEC / EN 61010-2-51
DOWNLOADS
RECOMMENDATIONS
-
PT-DA 05 / 2EC-F078EC «Standard Dispersing Aggregate»PT-DA 07 / 2EC-F101EC «Standard Dispersing Aggregate»PT-DA 12 / 2EC-F154EC «Standard Dispersing Aggregate»PT-DA 20 / 2EC-F193REC «Standard Dispersing Aggregate»PT-DA 30 / 2EC-F250EC «Standard Dispersing Aggregate»PT-DA 30 / 4EC-F250EC «Standard Dispersing Aggregate» with four rows of teethPT-DA 36 / 2EC-F250EC «Standard Dispersing Aggregate»PT-DA 36 / 4EC-F250EC «Standard Dispersing Aggregate» with four rows of teethPT-DA 12 / 2WEC-F154W «W-Design»PT-DA 20 / 2WEC-F193W «W-Design»PT-DA 20 / 2WG-F210W «W-Design» / W-design aggregate in gas-tight modelPT-DA 30 / 2WEC-F250W «W-Design»PT-DA 30 / 2WMEC-F250W «W-Design» / W-design aggregate with knivesPT-DA 36 / 2WEC-F250W «W-Design»PT-DA 36 / 2WMEC-F250W «W-Design» / W-design aggregate with knivesPT-DA 12 / 2MEC-F154M «Outside Cutting Blades»PT-DA 20 / 2MEC-F193M «Outside Cutting Blades»PT-DA 30 / 2MEC-F250M «Outside Cutting Blades»PT-DA 30 / 2MG-F273M «Outside Cutting Blades» / M-design aggregate in gas-tight modelPT-DA 36 / 2MEC-F400M «Outside Cutting Blades»PT-DA 07 / BEC-F101B «BIOTRONA® High-Turbulence Mixer»PT-DA 12 / BEC-F154B «BIOTRONA® High-Turbulence Mixer»PT-DA 20 / BEC-F193B «BIOTRONA® High-Turbulence Mixer»PT-DA 36 / BEC-F250B «BIOTRONA® High-Turbulence Mixer»PT-DA 30 / 2Z EC-F250Z «Z-Design»PT-DA 20 / 2G-F210G «Gas Tight»PT-DA 30 / 2G-F273G «Gas Tight»PT-DA 30 / 4G-F273G «Gas Tight» with four rows of teethPT-DA 36 / 2G-F273G «Gas Tight»PT-DA 36 / 4G-F273G «Gas Tight» with four rows of teethPT-DA 30 / DEC-F250DEC «Dissolver»TiN Rotor (Upgrade)TiN «Titanium nitrated» – Rotor Upgrade (ø 12 – 36 mm)TiN Stator (Upgrade)TiN «Titanium nitrated» – Stator Upgrade (ø 12 – 36 mm)
-
ST-F 10 / 600StandST-P 21 / 700Stainless steel plate standST-P 14 / 590+500Electric plate stand with EU-power cable (230 V)Vessel holderFor fixing any dispersing vessels, with guide for ST-P 14 / 590 + 500Boom adapterFor PT 3100 D for coupling with an H-foot stand ST-F10 / 600PT 100Temperature probeAdapter PT-DA / PTA (F / A)Coupling adapterW1Tool for changing rotorsUniversal jaw clampFor all shaftsInjectorFor PT-DA 20 and PT-DA 25
-
Dispersing vesselGS 15 / Cloverleaf-like shaped dispersing vessel made of borosilicateDispersing vesselGS 15K / Cloverleaf-like shaped dispersing vessel made of borosilicateDispersing vesselGS 15KL08 / Cloverleaf-like shaped dispersing vessel made of borosilicateDispersing vesselGS100-1 / Cylindrical-shaped stainless steel vesselDispersing vesselGS100-1.C / Cylindrical-shaped stainless steel vesselDispersing vesselGS100-1.C.B. / Cylindrical-shaped stainless steel vessel