Drive Unit incl. high frequency three phase motor 3.0kW and frequency inverter for speed control (with display, main switch and potentiometer), with electicalstand (230V) and H-Foot base from anodized aluminum, CEE16 power cable, 5m
This POLYTRON® is ideal for applications up to 50 liters and for users who need to scale up from research and development to pilot plant or small production scale processes. The aggregate is one of the most important elements when scaling up. This unit has a great deal of versatility in the size and numbers of aggregates that can be successfully used with it. It can accommodate both the smaller laboratory aggregates and the larger ones used for pilot plant and small production applications. This permits the direct comparison of results between the smaller and larger aggregates which makes the scale up decision much easier. This unit has also found great utility for applications requiring the multi-toothed rotor and stator in more viscous solutions because it can supply the higher torque required for turning the rotor at a sufficient speed for efficient homogenizations.
BENEFITS
– Application volumes up to 50 liters
– Available with 1500 up to 4000 Watt high torque motors
– Motor speed controllable from 500 to 12,000 rpm
– Aggregate tip speeds up to 34 m/s produce the finest particles possible
– Available with electrical stand for easy raising and lowering of motor
– Constant rotational speed regardless of load changes because of the higher torque motor
– Integrated overheating and generator blocking protection
– Aggregate replacement using one-handed quick-release coupling
– Insulated motor housing keeps motor noise to a safe, approved level during operation
– Various models of dispersing aggregates which are Easy-to-Clean and designed for many different applications
– EX version available upon request
TECHNICAL INFORMATION
-
30000
-
50000
-
3000
-
Up to max. 34 m/s
-
500 – 12 000 rpm
-
Aggregates with F coupling
-
3x 400 V ± 10%, 50 Hz
-
80 % during storage / 80 % during operation
-
0 – 40 °C
-
Digital / stepless
-
IP 55
-
44 kg
-
IEC / EN 61000-6-2 / EN 61000-6-3 / 61326-1
-
IEC / EN 61010-2-51
RECOMMENDATIONS
-
PT-DA 25 / 2EC-F400EC «Standard Dispersing Aggregate»PT-DA 30 / 2EC-F400EC «Standard Dispersing Aggregate»PT-DA 30 / 2FFV 2EC-F400EC «Standard Dispersing Aggregate»PT-DA 30 / 4EC-F400EC «Standard Dispersing Aggregate»PT-DA 36 / 2EC-F400EC «Standard Dispersing Aggregate»PT-DA 36 / 4EC-F400EC «Standard Dispersing Aggregate» with four rows of teethPT-DA 40 / 2EC-F400EC «Standard Dispersing Aggregate»PT-DA 45 / 2EC-F400EC «Standard Dispersing Aggregate»PT-DA 45 / 6EC-F400EC «Standard Dispersing Aggregate» with six rows of teethPT-DA 50 / 2EC-F400EC «Standard Dispersing Aggregate»PT-DA 50 / 4EC-F400EC «Standard Dispersing Aggregate» with four rows of teethPT-DA 50 / 4EC-F400EC «Standard Dispersing Aggregate» with four rows of teethPT-DA 60 / 2EC-F400EC «Standard Dispersing Aggregate»PT-DA 60 / 2EC-F400EC «Standard Dispersing Aggregate»PT-DA 30 / 2WEC-F400W «W-Design»PT-DA 30 / 2WM EC-F400W «W-Design» / W-design aggregate with knivesPT-DA 36 / 2WEC-F400W «W-Design»PT-DA 36 / 2WMEC-F400W «W-Design» / W-design aggregate with knivesPT-DA 40 / 2WEC-F400W «W-Design»PT-DA 45 / 2WEC-F400W «W-Design»PT-DA 50 / 2WEC-F250W «W-Design»PT-DA 60 / 2WEC-F400W «W-Design»PT-DA 30 / 2MEC-F400M «Outside Cutting Blades»PT-DA 36 / 2MEC-F400M «Outside Cutting Blades»PT-DA 40 / 2MEC-F400M «Outside Cutting Blades»PT-DA 50 / 2MEC-F400M «Outside Cutting Blades»PT-DA 60 / 2MEC-F400M «Outside Cutting Blades»PT-DA 30 / 2Z EC-F400Z «Z-Design»PT-DA 36 / BEC-F400B «BIOTRONA® High-Turbulence Mixer»PT-DA 45 / BEC-F400B «BIOTRONA® High-Turbulence Mixer»PT-DA 30 / 2G-F400G «Gas Tight»PT-DA 30 / 2MG-F400G «Gas Tight»PT-DA 30 / 4G-F400G «Gas Tight» with four rows of teethPT-DA 36 / 2G-F400G «Gas Tight»PT-DA 36 / 4G-F400G «Gas Tight»PT-DA 40 / 2G-F400G «Gas Tight»PT-DA 40 / 2MG-F400G «Gas Tight»PT-DA 45 / 2G-F400G «Gas Tight»PT-DA 50 / 2G-F400G «Gas Tight»PT-DA 50 / 2MG-F400G «Gas Tight»PT-DA 50 / 6G-F400G «Gas Tight» with six rows of teethPT-DA 60 / 2G-F400G «Gas Tight»PT-DA 60 / 2FG-F400G «Gas Tight»PT-DA 30 / DEC-F400DEC «Dissolver»PT-DA 53 / DEC-F400DEC «Dissolver»PT-DA 65 / DEC-F250DEC «Dissolver»